Circuit-33 (The Band)Not to be confused with circuits of any other variety

Before I go on, I feel that I must give you fair warning:

There are a few things that you must keep in mind about recovering drum shells with this sort of laminate:

• You only get one shot to get it right. Once the laminate is glued on, it’s not coming off.  It is very likely that any attempts to remove it will result in layers of plywood tearing off before the laminate will come off.  So make sure you are completely satisfied with whatever laminate color and pattern you choose.  If you have wooden drum shells, and apply the laminate as we did, you will not get a second chance!
• If you are afraid that by gluing a very thin but hard layer of laminate to your drum shells might change the sound of your drums, you might be right.  I had a mix ‘n match drum set,  so I was not worried about it because I knew that if it changed, it would probably change for the better.  You’ll notice that in the Before and After photos I also removed the bottom heads, which I knew would have an even greater effect on the drum’s sound than adding a layer of laminate, which it did.  I think they sound fine, but if you’re worried, you may not want to attempt this.
• You must be able to do some fairly precise measurements and cutting of the laminate because, unlike the original drum shell fabric that slightly overlaps itself around the shell, the laminate must be precisely trimmed to allow for the two edges to butt up together where they meet.  If you do a bad job the seam will show.

Now, with that out of the way . . .

You might think that the decision to use a countertop-type of material for re-covering drum shells would substantially limit your color and pattern choices.  Au Contraire! Compared to the choices I saw available for the actual replacement drum shell fabric kits, there were far more to choose from in laminates.  And I’m not just talking about minor variations of wood grains either.

Here is just a sample of what I found available from Wilsonart that I thought would make for some interesting, even bizarre, drum kits:

Unfortunately, I was under pressure to get mine finished in time for a gig, so there was no time to special order anything not already in stock from the local distributer.  I chose an exotic woodgrain style from the laminates in stock, and I have been satisfied with that choice.

(To Be Continued on Extreme Makeover – Drum Edition – Pt-3)