Circuit-33 (The Band)Not to be confused with circuits of any other variety

Before I go on, I feel that I must give you fair warning:

There are a few things that you must keep in mind about recovering drum shells with this sort of laminate:

• You only get one shot to get it right. Once the laminate is glued on, it’s not coming off.  It is very likely that any attempts to remove it will result in layers of plywood tearing off before the laminate will come off.  So make sure you are completely satisfied with whatever laminate color and pattern you choose.  If you have wooden drum shells, and apply the laminate as we did, you will not get a second chance!
• If you are afraid that by gluing a very thin but hard layer of laminate to your drum shells might change the sound of your drums, you might be right.  I had a mix ‘n match drum set,  so I was not worried about it because I knew that if it changed, it would probably change for the better.  You’ll notice that in the Before and After photos I also removed the bottom heads, which I knew would have an even greater effect on the drum’s sound than adding a layer of laminate, which it did.  I think they sound fine, but if you’re worried, you may not want to attempt this.
• You must be able to do some fairly precise measurements and cutting of the laminate because, unlike the original drum shell fabric that slightly overlaps itself around the shell, the laminate must be precisely trimmed to allow for the two edges to butt up together where they meet.  If you do a bad job the seam will show.

Now, with that out of the way . . .

You might think that the decision to use a countertop-type of material for re-covering drum shells would substantially limit your color and pattern choices.  Au Contraire! Compared to the choices I saw available for the actual replacement drum shell fabric kits, there were far more to choose from in laminates.  And I’m not just talking about minor variations of wood grains either.

Here is just a sample of what I found available from Wilsonart that I thought would make for some interesting, even bizarre, drum kits:

Unfortunately, I was under pressure to get mine finished in time for a gig, so there was no time to special order anything not already in stock from the local distributer.  I chose an exotic woodgrain style from the laminates in stock, and I have been satisfied with that choice.

(To Be Continued on Extreme Makeover – Drum Edition – Pt-3)

I started singing when I was in the 2′nd grade, and that’s about the time when I got the bug to perform in front of an audience.  When I was in Junior High School there was a band called “5 Fluid Ounces”, and they let me sing with them, but never in a show.  I guess they all got a kick out of hearing a kid sing songs from Foreigner, Journey, Tom Petty, and so on.   But I never took it too seriously until I moved to Mexico.

In Mexico my friends were all into groups like Motley Crew, Journey, Iron Maiden, Def Leopard, Judas Priest, and so on.  They heard me sing along to the music, as we all did. But one day there was a band holding auditions looking for a singer.  My friends told me that I should go try out, so I did.

At the audition I remember singing Led Zeppelin’s “Stairway to Heaven”,  and “Breaking the Law” by Judas Priest.  At the end of the audition they asked me if I would consider joining the band.  And in my very limited Spanish, I said yes, (“Si”).  They asked me where I was from.  When I told them “California”, they said: “No wonder you can pronounce the words so well!”  When they asked how much experience I had, I answered “none”, (or possibly “nada”, I don’t remember).  They were okay with my answer as long as I could consistently sing as well as I did in the audition.  That’s when the band “Jest” was born.

Jest played with another band that back then was known as “Green Hat”, (now known as “Mana‘ “).

After returning to the U.S. I joined a couple of bands that eventually fizzled into nothing.  But then my priorities changed.  I joined the workforce, settled down, got married to a wonderful woman, raised a beautiful daughter, and now we fast-forward to 2007 when all the right musicians came together and we formed “Circuit-33″!

Occasionally someone will ask me how long I’ve been playing drums. (Poor suckers!)

Little do they know that when they ask a question like that, I’m likely to bore them to tears with answers such as the following:

I didn’t have actual drums when I started playing at around 11 or 12 years of age.  Buying a real set was out of the question at the time.  So I made my own drum kit out of different sized coffee cans, and using a piece of wire I tied it all onto a small wooden chair.  I put a handful of nails in one can and called it the snare drum.  I cut the bottom out of one can and taped it to the top of another to make a deeper floor tom.

Apparently my grandfather, who died long before I was born, used to play the bass drum in a marching band.  My father still had the tarnished old cymbal that had been attached to that bass drum, so that became my one and only cymbal, attached to the back of the chair using a nail.  I remember holding paint brushes (by the bristle-end) to use as my drum sticks.  (We really were not that impoverished, although my saga implies otherwise.)

Sure!  Go ahead and laugh!  Get it out of your system.  But I was a kid on a without a budget, and had an overactive imagination.  There was junk available and I had nothing but time.    What can I say?  (It was the “perfect storm”.)  And besides, I just discovered that I am not alone in this.

There may have been a connection between me purchasing real drum sticks and the fact that I used to routinely break through the plastic coffee can lids I used as drum heads.  Since my parents selfishly  refused to drink coffee  at a pace consistent with my need for replacement drum heads, I was forced to patch the broken areas by melting pieces cut from other lids.  In the process I found that I could get different sounds by making some ‘heads’ thicker than others.

That was my first ‘drum kit’.  That is what I used to learn the basics of drumming on.   That’s where I learned to make basic crossover moves and associate different sounds to different sized drums, (or in my case, cans).  That lasted me until I was about 16 years old, at which time I managed to scrape together $150 for a cheap, used, 5-piece set, complete with some of the worst sounding cymbals I have ever broken.

It was at that point that I came to realize just how different playing a real set was:

1. These ‘real drums’ were tunable.  (What a concept!)
2. They were much louder.  (My parents rejoiced!)
3. They were much larger and therefore further away from each other, requiring me to move quicker in order to reach from one to another.
4. These drums provided more of a stick bounce which, in time, made  actual drum rolls possible.
5. Although they were junky, there were more cymbals to hit.  (The classic “More Cymbals, More Fun!” point of view.)
6. The biggest difference was that they required my feet to do something!  (I had no prior experience using pedals, except those attached to my bike.  Yikes!)

So just when I thought I could drum, reality set in, showing me in no uncertain terms that I was only using a mere half of my limbs, whilst real drummers ‘fired on all four cylinders’.   (It may have been at that lull in my self esteem that I discovered the blues . . .)

I mainly played along to records and tapes.  I guess my enjoyment for making music by drumming along to the music I loved, kept my interest in drumming alive and well, to the point that I stayed with it and saw my own gradual progress.  I’m not sure I would have had the same  enthusiasm  or sticktoitiveness in taking lessons if I felt I was being burdened by rigidly having to practice flams and paradiddles everyday instead of playing along to In-A-Gadda-Da-Vida just for the fun of it.  On the other hand, seeing what truly great drummers (such as Dave Weckl) can do seemingly effortlessly, builds a strong case for the structured learning that comes only with years of drum lessons.

Would I recommend drum lessons for beginners?  Absolutely!  There is no substitute for professional training by those that already know what their doing.  And I’m sure that had I taken professional lessons I would have been greatly benefited.  But I loved playing drums and learning in my own way, and at my own pace.  So even though I never had lessons, all things considered, I think I do fairly well despite the fact that I’m self-taught.

Brad Kunz

Have you ever wished your drums had a different finish?  Did you ever scratch or ding one of your drums so badly that it now has a permanent blemish that cannot be fixed?

The following article describes how I, (with the help of a couple true friends), performed what I refer to as:  Extreme Makeover – Drum Edition.  It chronicles how we transformed the drums pictured below from “Before” to “After”.

BEFORE

AFTER

My drum set is comprised of pieces from various sets I’ve used through the years.  And although I’ve adjusted and tweaked them to the point where they sounded pretty good, they looked horrendous.  Playing them in my own home was one thing, but they were definitely not ready for prime time, so when we started booking gigs I had to get serious about doing something, as the photos below testify:

I certainly could not afford to buy a new 8-Piece drum kit, and could not really justify it anyway since it was just a matter of aesthetics. I did a little research online and found several vendors that sell replacement drum shell fabric kits, but I was surprised at how costly that proved to be.  I began thinking about how soft, and easy to scuff, the material is that drum manufacturers typically use to cover their drum shells.  I started wondering whether it would be feasible to use a hard countertop-type laminate to replace the original material.

So one day I asked Erik, my friend in the custom cabinetry business, about it.  (He is a master craftsman in the industry.  He owns and operates his own shop in Southern California.  He specializes in creating custom store fronts for the dry cleaning industry, so he has seen it all when it comes to what can and cannot be done regarding the application of laminates.)

The main concern in using laminates for replacement drum covering centers on being able to get it to conform and stay around the curvature of a drum shell.  Nonetheless, Erik told me that it should be no problem if done properly, and that laminate can be applied to a fairly small radius, certainly smaller than the radius of my smallest (8″) drum.  He invited me to come by his shop and he would see what could be done.

(Continued on Extreme Makeover – Drum Edition – Pt-2)